• O.V. Lounasmaa Laboratory
  • About
  • Contact information
  • Events
  • Picture archive
• LT Research
  • Rota group
  • µKI group
  • Helium theory group
• Nanophysics
  • Nano group
  • Pico group
  • Kvantti group
  • NEMS group
  • Nano theory group
• Brain Research Unit
  • Human systems neuroscience
  • Imaging Language
  • Vision systems neuroscience
• Publications
• Courses
• Services
  • Facilities
  • Infrastructure
• Internal
  • Help on LTLwiki
  • Register to LTL
  • Computing
    • LT webmail
    • BRU webmail
  • Internal BRU pages
    • Human systems neuroscience
    • Imaging Language
    • Vision systems neuroscience
  • Helium group pages
  • Nanophysics
  • Recent LTLwiki changes

Director: Pertti Hakonen
Secretary:

Fax: +358 9 470 22969

Mail address:
PO BOX 15100
00076 AALTO
FINLAND

Visiting address:
Puumiehenkuja 2B
Otaniemi, Espoo

How to find us

Vastuualue: T31100
VAT number: FI22283574

Bonder

Contents 1 General Information 2 Bonder wire behavior 3 Tutorial 4 Bonding using a predefined program 4.1 Creating a new program 5 User List

General Information

• Device: Delvotec 5430 Bonder
• Contact Person: Alexander Savin
• Location: AFM Room
• Status: Working
• Specifications
• Full Manual

Bonder wire behavior

Tutorial

Bonding using a predefined program

• Initializing

1. Switch power on
2. Press home
3. Press read to load a program from the memory. There is a list of all the programs in a notebook titled Delvotec 5430.
4. Use and to select the program number
5. Press enter to load the program
6. Press bond to move to starting position

• Bonding loop

1. Move the sample so that you are approximately on top of the first bonding pad
2. Press bond to move to programmed starting height
3. Finetune the sample position (at this point it's best to use the left-hand controller)
4. You can use up and down to control the height (the used height is set up as the new starting height when you press bond)
5. Press bond to bond the wire and move to the end position
6. Move the sample so that you are approximately on top of the second bonding pad
7. Press bond to move to programmed end height
8. You can use up and down to control the height (the used height is set up as the new end height when you press bond)
9. Press bond to bond the wire, cut it and move to starting position)

Creating a new program

Description of the procedure can be found in the manual. The simplest way is to modify old program and save it under new name.

User List

Name	Department/group/Unit code	Training date	Instructor	tel. and e-mail	comments
Alexander Savin	LTL/Admin/T31100	01.01.2000	A.Savin - Main User	050-3442752 savin@ltl.tkk.fi	Nanotalo room 178a
Matthias Brandt	LTL/NEMS/T31110	22.10.2012	A.Savin	mbrandt@ltl.tkk.fi	Nanotalo room 162a
Qihang Qin	Applied Physics/Nanospin/T30412	23.10.2012	A.Savin	0503015886, qihang.qin@aalto.fi	Nanotalo room 225
Robab Najafi Jabdaraghi	LTL/KVANTTI/T31104	23.10.2012	A.Savin	0503442856 najafi.leila@gmail.com	Nanotalo room 177
Pasi Lähteenmäki	LTL/NANO/T31105	1.1.2009	A.Savin	0503442306 pasi.lahteenmaki@aalto.fi	Nanotalo room 162a
Daniel Cox	LTL/NANO/T31105	1.1.2009	A.Savin	050344 2721 daniel.cox@ltl.tkk.fi	Nanotalo room 162a
Arianna Casiraghi	Applied physics Dep./Prof. Sebastiaan van Dijken	13.5.2013	A.Savin	050 4122198 arianna.casiraghi@aalto.fi	Nanotalo room N225
Kévin Franke	Applied physics Dep./T30412	13.5.2013	A.Savin	0505918107 kevin.franke@aalto.fi	Nanotalo room N227
Teemu Nieminen	LTL/NANO/T31105	11.6.2013	A.Savin	0407346496 teemu.j.nieminen@aalto.fi	Nanotalo room 162a